DURUM Wear protection https://durmat.com/en DURUM produces high quality cored wires, electrodes and powders that make your workpieces even harder and more wear resistant. Wed, 12 Apr 2023 13:24:13 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.5 https://durmat.com/wp-content/uploads/cropped-favicon2-32x32.gif DURUM Wear protection https://durmat.com/en 32 32 Types of packaging https://durmat.com/en/faq-help-information/types-of-packaging/ Wed, 29 Mar 2023 09:01:04 +0000 https://durmat.com/?p=6508 Der Beitrag Verpackungsarten erschien zuerst auf DURUM Verschleißschutz.

]]>
Packing typeWire basket spoolWood and steel coilBarrel Net weight15 kg25 kg250/300 kg150 kg250 kg Outer Ø300 mm435 mm760 mm550 mm550 mm Inner Ø51.5 mm300 mm41 mm-- Wide103 mm105 mm290 mm-- Height---400 mm800 mm NormEN 759 - BS 300EN 759 - B 435EN 759 - S 760--

Der Beitrag Verpackungsarten erschien zuerst auf DURUM Verschleißschutz.

]]>
Welding recommendation https://durmat.com/en/faq-help-information/welding-recommendation/ Thu, 23 Mar 2023 13:19:59 +0000 https://durmat.com/?p=6042 Welding recommendation

Der Beitrag Schweißempfehlung erschien zuerst auf DURUM Verschleißschutz.

]]>

Welding recommendation

ProcessØPowerVoltageFeedStick-outCurrent type
Open Arc1,6 mm180 - 200 A26 - 30 V-30 - 35 mmDC (+)
2.0 mm200 - 250 A27 - 30 V-35 - 40 mmDC (+)
2.4 mm250 - 300 A28 - 30 V-36 - 40 mmDC (+)
2.8 mm300 - 350 A29 - 30 V-37 - 40 mmDC (+)
3.2 mm350 - 400 A30 - 30 V-38 - 40 mmDC (+)
UP (SAW)3.2 mm325 - 450 A28 - 30 V35 - 45 cm/min30 - 35 mmDC (+)
4.0 mm400 - 500 A28 - 30 V40 - 45 cm/min30 - 35 mmDC (+)

Der Beitrag Schweißempfehlung erschien zuerst auf DURUM Verschleißschutz.

]]>
Trade forms https://durmat.com/en/faq-help-information/trading-forms/ Fri, 15 Jul 2022 08:38:09 +0000 https://durmat.com/?p=4366 Trade forms

Der Beitrag Handelsformen erschien zuerst auf DURUM Verschleißschutz.

]]>

Trade forms

Illustration for Business Forms
Wire basket spoolPlastic coilDrum winding
Net weight:15 kg25 kg15 kg25 kg100/150 kg200/250 kg
Outer diameter:300 mm435 mm300 mm435 mm550 mm
Inner diameter:51.5 mm300 mm51.5 mm300 mm
Width:103 mm105 mm103 mm105 mm--
Height:----400 mm800 mm
Norm:EN 759 /EN 759 /EN ISO 14919EN ISO 14919--
S 300BS 435(BS 300)(R 435)

Der Beitrag Handelsformen erschien zuerst auf DURUM Verschleißschutz.

]]>
Mesh micrometer conversion https://durmat.com/en/faq-help-information/mesh-micrometer-conversion/ Fri, 15 Jul 2022 08:37:02 +0000 https://durmat.com/?p=4358 Conversion table

Der Beitrag Mesh-Mikrometer-Umrechnung erschien zuerst auf DURUM Verschleißschutz.

]]>

Conversion table

Mesh micrometer conversion table
MicrometerMesh-UKMesh USA (ASTM)Mesh USA (TYLER)
8000n/a5/16 in2,5
670010.265 in3
560033,53,5
47503,5n/a4
4000455
3350566
2800677
2360788
20008109
1700101210
1400121412
1180141614
1000161816
850182020
710222524
600253028
500303532
425364035
355444542
300525048
250606060
212727065
180858080
150100100100
125120120115
106150140150
90170170170
75200200200
63240230250
53300270270
45350325325
38400400400
32440450n/a
25n/a500500
0n/a635n/a

Der Beitrag Mesh-Mikrometer-Umrechnung erschien zuerst auf DURUM Verschleißschutz.

]]>
Hardness conversion https://durmat.com/en/faq-help-information/value-conversion/ Fri, 15 Jul 2022 08:36:01 +0000 https://durmat.com/?p=4353 Conversion table

Der Beitrag Härteumrechnung erschien zuerst auf DURUM Verschleißschutz.

]]>

Conversion table

Hardness conversion
HVHBHRC
10095-
110105-
120114-
130124-
140133-
150143-
160152-
170162-
180171-
190181-
200290-
210200-
220209-
230219-
24022820,3
25023822,2
26024724,0
27025725,6
28026627,1
29027628,5
30028529,8
31029531,0
32030432,2
33031433,3
34032334,4
35033335,5
36034236,6
37035237,7
38036138,8
39037139,8
40038040,8
41039041,8
42039942,7
43040943,6
44041844,5
45042845,3
46043746,1
47044746,9
48045647,7
49046648,4
50047549,1
51048548,8
52049450,5
53050451,1
54041351,7
55051352,3
56052353,0
57054253,6
58055154,1
59056154,7
60057055,2
61058055,7
62058956,3
63059956,8
64060857,3
65061857,8
66062058,3
670-58,8
680-59,2
690-59,7
700-60,1
710-60,5
720-61,0
730-61,4
740-61,8
750-62,2
760-62,5
770-62,9
780-63,3
790-63,7
800-64,0
810-64,3
820-64,7
830-65,0
840-65,3
850-65,6
860-65,9
870-66,2
880-66,4
890-66,7
900-67,0

Der Beitrag Härteumrechnung erschien zuerst auf DURUM Verschleißschutz.

]]>
Conversion table diameter https://durmat.com/en/faq-help-information/conversion-table-diameter/ Fri, 15 Jul 2022 08:34:47 +0000 https://durmat.com/?p=4346 Millimeter Inches

Der Beitrag Umrechnungstabelle Durchmesser erschien zuerst auf DURUM Verschleißschutz.

]]>

Millimeter Inches

Dia. [mm]Dia. [inch.]Dia. [mm]Dia. [inch.]
1,2Mar 642,4Mar 32
1,6Jan 162,8Jul 64
2May 643,201 Aug

Der Beitrag Umrechnungstabelle Durchmesser erschien zuerst auf DURUM Verschleißschutz.

]]>
Melting capacity https://durmat.com/en/faq-help-information/melting-capacity/ Fri, 15 Jul 2022 08:33:41 +0000 https://durmat.com/?p=4340 Melting capacity

Der Beitrag Abschmelzleistung erschien zuerst auf DURUM Verschleißschutz.

]]>

Melting capacity

ProcessØPowerVoltageMelting capacity
AUTOGEN: Powder---0.2 - 1 kg/h
AUTOGEN: Staff3 - 8 mm--<2 kg/h
STANDARD ELECTRODE:4 mm180 А24 V1,62 kg/h
5 mm250 А25 V2,01 kg/h
HIGH PERFORMANCE ELECTRODE:4 mm240 А25 V2,97 kg/h
5 mm350 А26 V4,30 kg/h
MASSIVDRAHT:1,2 mm150 - 300 А23 - 30 V2.2 - 5 kg/h
1.6 mm200 - 390 А25 - 33 V3 - 5.5 kg/h
FILL WIRE:1.6 mm150 - 300 А25 - 29 V3 - 6.5 kg/h
2.4 mm240 - 400 А26 - 31 V4 - 7.5 kg/h
2.8 mm270 - 450 А26 - 31 V5 - 9.5 kg/h
3.2 mm300 - 500 А26 - 31 V6 - 11 kg/h
PTA:-50 - 400 А20 - 50 V0.5 - 20 kg/h

Der Beitrag Abschmelzleistung erschien zuerst auf DURUM Verschleißschutz.

]]>
Protective gases (according to DIN EN ISO 14175) : https://durmat.com/en/faq-help-information/schutzgase-nach-din-en-iso-14175/ Fri, 15 Jul 2022 08:32:48 +0000 https://durmat.com/?p=4335 Classification of process gases

Der Beitrag Schutzgase (nach DIN EN ISO 14175) erschien zuerst auf DURUM Verschleißschutz.

]]>

What does DIN EN ISO 14175 cover?

DIN EN ISO 14175 “Welding consumables – Gases and gas mixtures for fusion welding and allied processes” classifies shielding, backing and process gases into groups according to their chemical behaviour. The valid edition is ISO 14175:2008, which was confirmed in 2023. It superseded the former EN 439, whose designations were considerably more general.

The main groups at a glance

GroupBehaviourComposition (simplified)
IinertArgon, helium or argon-helium mixtures
M1, M2, M3oxidizing (mixed gases)Argon with CO₂ and/or O₂; the oxidizing share increases from M1 to M3
Cstrongly oxidizingpure CO₂ or CO₂ with oxygen
RreducingArgon with hydrogen
Nlow reactivityNitrogen or nitrogen-containing mixtures
OoxidizingOxygen
Z–Mixtures outside the specified ranges

The exact limit values of each subgroup are given in the table below.

How to read the designation

A gas is designated by the standard number, group, chemical symbols and proportions, for example: ISO 14175 – M21 – ArC – 18

  • M21: mixed gas of subgroup M2/1 (15 to 25 % CO₂ in argon)
  • ArC: components argon and CO₂
  • 18: nominal percentage of the additional gas, here 18 % CO₂, balance argon

Classification of process gases

SymbolComponents in volume percent (nominal)
MainUnder-oxidizinginertreducinglow reactivity
groupgroupCO2O2ArHeH2N2
I1100
2100
3Rest0.5≤He≤95
M110.5≤CO2≤5Rest0,5≤H2≤5
20.5≤CO2≤5Rest
30,5≤O2≤3Rest
40.5≤CO2≤50,5≤O2≤3Rest
M205≤CO2≤15Rest
115≤CO2≤25Rest
23≤O2≤10Rest
30.5≤CO2≤53≤O2≤10Rest
45≤CO2≤150,5≤O2≤3Rest
55≤CO2≤153≤O2≤10Rest
615≤CO2≤250,5≤O2≤3Rest
715≤CO2≤253≤O2≤10Rest
M3125≤CO2≤50Rest
210≤O2≤15Rest
325≤CO2≤502≤O2≤10Rest
45≤CO2≤2510≤O2≤15Rest
525≤CO2≤5010≤O2≤15Rest
C1100
2Rest0,5≤O2≤30
R1Rest0,5≤H2≤15
2Rest15≤H2≤50
N1100
2Rest0,5≤N2≤5
3Rest5≤N2≤50
4Rest0,5≤H2≤100,5≤N2≤5
50,5≤H2≤50Rest
O1100
ZMixed gases with components not listed in the table or mixed gases with a
Composition outside the specified ranges.

Which shielding gas for DURMAT® materials?

Many DURMAT® cored wires are self-shielded and are welded as “open arc” without additional shielding gas; for this purpose, the powder filling contains its own shielding gas formers or provides a protective, covering slag layer. These wires carry the suffix “OA” for open arc in the product name. In submerged arc welding, the welding flux protects the weld pool. Recommendations for the welding flux can be found in the respective data sheets. For product groups processed with shielding gas, the recommended gas group according to DIN EN ISO 14175 is generally M13 or M21 for iron-based wires, I1 for nickel-based and cobalt-based wires without hard particles, and M13 for nickel-based wires of type Ni20 with hard particles. The shielding gas recommendation in the respective data sheet must always be observed.

Frequently asked questions

M21 is a mixed gas of argon with 15 to 25 % CO₂. C1 is pure CO₂.

EN 439. Its group designations such as M21 live on in ISO 14175, but are supplemented there by the exact composition.

Mixtures with components not listed in the table, or with proportions outside the specified ranges.

Questions about processing our filler materials? Our application engineers will help: +49 2154 4837-0 · info@durum.de

Der Beitrag Schutzgase (nach DIN EN ISO 14175) erschien zuerst auf DURUM Verschleißschutz.

]]>
Applications (Tribology) https://durmat.com/en/faq-help-information/applications-tribology/ Fri, 15 Jul 2022 08:21:38 +0000 https://durmat.com/?p=4324 Overview of wear applications

Der Beitrag Anwendungen (Tribologie) erschien zuerst auf DURUM Verschleißschutz.

]]>

Overview of wear applications

Solid - SolidSliding wearGuide rail, slide railFe1, Fe2, Fe3, Cu1A, B, C, T
Solid - FrictionImpact wearForging hammerFe9, Fe10, Al1, Ni1, Ni4G, H, S
Boundary frictionImpact wearRocker arm, camFe1, Fe2, Fe3A, B, C
Mixed frictionRolling wearStreetcar rail, switchFe9, Fe10G, H
Illustration for Applications (Tribology)Rolling wearImpellerFe1, Fe2, Fe3, Fe9A, B, C, G
Rolling wearStrand guide rollerFe7E
Impact wearRoller table rollerFe3, Fe6, Fe7, Fe8C, E, F
Thermal shockDriver roller, reelFe3C
Illustration for Applications (Tribology)Forging dieFe3, Fe4, Fe6, Fe8, Co1-3, Ni2, Ni4C, D, F
Shock sliding wear, coldShear blade, cutting edgeFe4, Fe5, Fe8, Co1-3D, F, O
Shock sliding wearHot shear bladeFe3, Fe4, Co2, Ni2, Ni4C, D, P, S
warmPerforated mandrelFe3, Fe4, Co2, Ni2, Ni4C, D, P
Solid - SolidShock sliding wearCrusher jaws, crusher hammerFe6, Fe8, Fe9, Fe14F, G, L
With particlesImpact barFe6. Fe8, Fe9F, G
Illustration for Applications (Tribology)SpinebreakerFe6, Fe8, Fe9, Fe13-15F, K, L, M, N
Grate bar, grate beamFe13-15K, L, M
Coal mill beaterFe8, Fe13-15F, K, L, M
Wear plateFe13-15K, L, M
Solid - ParticleImpact wearPlowshare, bucket knifeFe15, Fe20, Ni20M
High surface pressureSliding wearDischarge tables, chuteFe14, Fe15, Fe20, Ni20L, M
and shockWear plateFe14, Fe15, Ni1-4, Ni20L, M
Solid - SolidFurrow wearExtruderFe14, Fe15, Fe20, Ni1, Ni3, Ni20, Co1-3L, M, P, Q
and particlesScrew conveyorFe14, Fe15, Fe20, Ni1, Ni3, Ni20, Co2, Cr1L, M, P, Q
High surface pressureBucket knifeFe15, Fe20, Ni20M
Illustration for Applications (Tribology)Fang, RipperFe2, Fe6, Fe8B, F
Mixer part, mixer bottomFe6, Fe8, Fe14, Fe20, Ni1, Ni3, Ni20F, L, Q
Brick press moldFe6, Fe8, Fe14, Ni1, Ni3F, L
Grinding segment, grinding ringFe14L
Solid - ParticleGrain sliding wearBlast furnace valve, blast furnace gas valveFe6, Fe7, Fe8E, F
and gas(T>500°C)Gout bell, seatFe3, Fe6, Fe8, (Fe16)C, F, (N)
Illustration for Applications (Tribology)Blast furnace charging hopperFe15, Fe16M, N
Furnace fittings, slide valvesFe7, Co1, Co2E, O, P
Fan bladeFe10, Fe15, Fe16, Fe20, Ni1-4, Ni20H, M, N, Q
Spike crusher, wear plateFe14, Fe15, Fe20, Ni1, Ni3, Ni20L, M, Q
Solid - LiquidFlushing wearSteel pipingFe14, F15L, M
and particlesErosionSea dredging guidesFe6, Fe8F
Illustration for Applications (Tribology)Fluid pumpFe6, Fe7, Fe8, Ni1, Ni3E, F
Mixer partsFe6, Fe7, Fe8E, F
Erosion, corrosionPropellerCu1T
Water turbineFe7, Cu1E, T
Solid - LiquidCorrosionChemical apparatusFe7, Fe11, Fe12E
Fitting sealing surfacesFe7, Fe11, Fe12E, O, P
* Alloy group according to DIN EN 14700:2014
** Alloy group according to old DIN 8555-1

Der Beitrag Anwendungen (Tribologie) erschien zuerst auf DURUM Verschleißschutz.

]]>
Alloy types (according to DIN EN 14700) https://durmat.com/en/faq-help-information/alloy-types-according-to-din-en-14700/ Fri, 15 Jul 2022 07:49:27 +0000 https://durmat.com/?p=4291 Der Beitrag Legierungstypen (nach DIN EN 14700) erschien zuerst auf DURUM Verschleißschutz.

]]>

What does DIN EN 14700 cover?

DIN EN 14700 “Welding consumables – Welding consumables for hardfacing” classifies filler materials for build-up welding into alloy classes according to their chemical composition. For covered electrodes, cored wires, cored rods, cored strips, sintered strips, sintered rods and metal powders, the composition of the all-weld metal is decisive. For solid wires, solid rods, strips and cast rods, the composition of the product itself is decisive.

The current version is DIN EN 14700:2023-02, the German version of EN 14700:2022. It replaces the EN 14700:2014 edition. The standard superseded the former national standard DIN 8555. Our data sheets still state the DIN 8555 designation for comparison.

How to read the designation

A designation according to DIN EN 14700 consists of:

  1. Product form: for example E for covered electrode or T for cored wire or cored rod.
  2. Alloy class: base element (Fe, Ni, Co, Cr, Cu, Al) plus a number, for example Fe8. The table below lists the chemical limits of each class.

Example from our range: the cored wire DURMAT® FD 4028 is classified as T Fe8 – a cored wire of class Fe8. In our data sheets we add the hardness and the suitability letters to the designation, for example T Fe 8-50-CGPT. The suitability letters are explained below the table.

Note on the Z class: filler materials whose composition does not fit any class in the table are designated with a preceding Z. Two products with the same Z designation are therefore not necessarily interchangeable.

Alloy abbreviationSuitabilityChemical composition in mass fractions in percentc
CCrNiMnMoWVNbFeCoCuAlOther
Fe1p≤ 0,4≤ 3,5≤ 3≤ 4,5≤ 1≤ 1≤ 1-Rest---Si, Ti
Fe2p (g) (s)0,4 - 1,5≤ 7≤ 1≤ 3≤ 4≤ 1≤ 1-Rest≤ 1≤ 1-Si, Ti
Fe3s t0,1 - 0,51 - 15≤ 5≤ 3≤ 5≤ 10≤ 1,5≤ 3Rest≤ 13--Si, Ti
Fe4s t (p)0,2 - 1,52 - 10≤ 4≤ 3≤ 10≤ 20≤ 4-Rest≤ 5--Si, Ti
Fe5c p s t w≤ 0,5≤ 0,117 - 22≤ 13 - 5---Rest10 - 15-≤ 1Si, Ti
Fe6g p s≤ 2,5≤ 10-≤ 3≤ 3--≤ 10Rest---Si, Ti
Fe7c p t≤ 0,211 - 30≤ 6≤ 3≤ 2-≤ 1≤ 1Rest---Si, N
Fe8g p t0,2 - 25 - 20-≤ 3≤ 5≤ 2≤ 2≤ 10Rest---Si, Ti
Fe9k p (n)≤ 1,2≤ 20≤ 59 - 20≤ 2-≤ 1-Rest---Si, Ti
Fe10c k p z (n)≤ 0,2517 - 227 - 113 - 8≤ 1,5--≤ 1,5Rest---Si
Fe11c n z≤ 0,317 - 328 - 20≤ 3≤ 4--≤ 1,5Rest---Si, Cu
Fe12c n (z)≤ 0,1217 - 279 - 26≤ 3≤ 4--≤ 1,5Rest---Si
Fe13g≤ 1,5≤ 7≤ 4≤ 3≤ 4---Rest---Si, B, Ti
Fe14g (c)1,5 - 4,525 - 40≤ 4≤ 3≤ 4---Rest---Si
Fe15g3 - 720 - 40≤ 4≤ 3≤ 2--≤ 10Rest---Si, B
Fe16g z4 - 810 - 40-≤ 3≤ 10≤ 10≤ 10≤ 10Rest---Si, B
Fe17c k p v≤ 0,3≤ 20≤ 58 - 20≤ 2≤ 0,3--Rest10 - 15--Si
Fe20c g t z--------Rest---Hard material b
Ni1c p t≤ 115 - 30Rest≤ 1≤ 6≤ 2≤ 1-≤ 5---Si, B
Ni2c k p t z≤ 0,114 - 30Rest≤ 1,510 - 30≤ 8≤ 1≤ 5≤ 10≤ 5--Si, Ti
Ni3c p t≤ 1≤ 15Rest≤ 1≤ 6≤ 2≤ 1-≤ 5---Si, B
Ni4c k p t z≤ 0,11 - 20Rest≤ 1,5≤ 30≤ 8≤ 1≤ 5≤ 3≤ 15-≤ 3Si, Ti
Ni20c g t z--Rest---------Hard material b
Co1c k t z≤ 0,620 - 35≤ 100,1 - 2≤ 10≤ 15-≤ 1≤ 5---Si
Co2t z (c) (s)0,6 - 320 - 35≤ 40,1 - 2-4 - 10--≤ 5---Si
Co3t z (c) (s)1 - 320 - 35≤ 4≤ 2≤ 16 - 15--≤ 5---Si
Cr1g n1 - 5Rest-≤ 1--15 - 30-≤ 5---Si, B, Zr
Cu1c (n)--≤ 6≤ 2----≤ 5-Rest7 - 15Sn
Cu2c (n)--≤ 6≤ 15----≤ 5-Rest≤ 9Sn
Al1c n--10 - 35≤ 0,5------≤ 6RestSi
Z-Any other agreed compositiona
c: stainlessn: non-magnetizablev: cavitation resistantw: precipitation hardening
g: emery resistantp: impact resistantt: heat resistant
k: work hardenings: cuttingz: scale resistant
( ): Suitability limited or possibly not applicable for all alloys of this classification.
a) Filler metals for which no chemical composition is specified in the table shall be marked in a similar manner, preceded by the letter Z. No ranges are specified for the chemical composition; therefore, it is possible that two products with the same Z classification are not interchangeable.
b) Tungsten fused carbide or tungsten cemented carbide, fractured or spherical.
c) The individual values given in the table are maximum values.

DURMAT® products by alloy class

Frequently asked questions

DIN EN 14700. Many data sheets, including ours, state both designations side by side so that older specifications can still be matched.

They describe the suitability of an alloy class, for example p for impact resistant or g for abrasion resistant, i.e. resistant to abrasive wear. The complete list is given below the table. If a letter is shown in brackets, the suitability is limited.

Not automatically. The class only defines limits for the chemical composition. Hardness, microstructure and wear behaviour can differ considerably within one class. We will be glad to advise you on the selection.

Typical choices are the high-carbon, high-chromium classes Fe13 to Fe16 and the tungsten carbide classes Fe20 and Ni20.

Looking for the right material for your wear protection application? Our application engineers will be happy to advise you: +49 2154 4837-0 · info@durum.de

Der Beitrag Legierungstypen (nach DIN EN 14700) erschien zuerst auf DURUM Verschleißschutz.

]]>