English 
Deutsch 
Русский 
Français 
Español 
Português do Brasil 
Italiano 
Tool steels
| DURMAT® | Typical chemical composition (pure weld metal in wt.-%): | Typical hardness | DIN EN 14700 DIN 8555 |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Si | Mn | Cr | Ni | Mo | Co | Nb | V | W | Fe | + | |||
| FD WZ 54 | 0,3 | 0,6 | 0,6 | 8 | 2,2 | 2,5 | - | - | 0,35 | 0,5 | R | - | 53 - 55 HRC 56 - 58 HRC* | T Fe 3-55-ST MF 3-55-ST |
| FD WZ 55 | 0,35 | 0,8 | 1,2 | 3,5 | - | - | 2 | - | 0,5 | 8 | R | - | 53 - 55 HRC 56 - 58 HRC* | T Fe 3-55-STW MF 3-55-ST |
| FD WZ 59 | 0,5 | 0,6 | 1,2 | 5 | - | 3,5 | - | - | - | 3,5 | R | - | 57 - 59 HRC | T Fe 3-60-ST MF 3-60-ST |
| FD WZ 60 | 0,8 | 0,6 | 0,4 | 4,5 | - | 8 | - | - | 1,5 | 2 | R | - | 58 - 60 HRC** | T Fe 4-60-ST MF 4-60-ST |
| FD WZ 6356 | <0,03 | - | - | - | 18 | 4 | 12 | - | - | - | R | Ti: 1.6 | 41 - 43 HRC 53 - 56 HRC* | 1.6356 |
| R = residual, * after heat treatment, ** after air cooling | ||||||||||||||
- Request information material
Notice: The mandatory field is marked. All other fields are voluntary. Your data will only be collected and stored electronically strictly for the purpose of processing and responding to your request. Information on data processing can be found here: Privacy.
You need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More InformationMore products
Nickel base (Ni)
Nickel base (Ni)
The main field of application is armoring of hammer saddles, hot shear blades, stretching inserts.
About the product
DURUM - Made in GERMANY
We manufacture our wear protection solutions for you exclusively in Germany.